TECNOMIX 130 PLANETARY MIXER

Compact planetary mixer with reduced dimensions, lightweight and easy to transport, even in small vehicles. It is ideal for mixing pre-mixed or pre-dosed bagged products efficiently and with minimal effort.
The homogeneity of the mixed material is unmatched — there are no cement lumps in floor screeds or fiber clumps in fiber-reinforced materials. When needed, the Tecnomix 130 can also be used for mixing traditional products, always guaranteeing maximum yield and mixture uniformity.

specifications

Suitable for mixing
Pre-mixed or traditional cement screeds, including those with fibers and/or additives
Pre-dosed lightweight screeds with expanded clay (<10 mm, 2 bags per cycle)
Thermal insulation screeds (1 bag per cycle)
Self-leveling subfloors (anhydrite/cement-based)
Cement/lime/gypsum-based plasters
Fiber-reinforced structural plasters with or without additives
Renovation plasters
Traditional plasters
Injection mortars and binders
Reinforcement mortars
Bedding mortars (pre-mixed or traditional)
Filling concrete (<8 mm aggregate size)
Cement-based adhesives (large quantities)
Smoothing mortars and finishing stuccos (large quantities)
Waterproofing materials (large quantities)

Safety grind sensor
For operator safety, an electric device stops the blade rotation when the drum grid is lifted.
A low-voltage coil prevents accidental restart after a power failure.
All moving mechanical parts are protected against accidental contact.

Discharge spout
Optimized discharge spout for easy emptying of the mixed material.
The anti-intrusion grid protects the operator from accidental contact with the mixing blades.

Adjustable legs
Extendable legs allow adjustment of the discharge height, making it easy to empty the mixture into a wheelbarrow or plastering machine.

Gear motor with oil-bath gears
A sturdy gear motor with oil-bath gears reduces noise levels, ensuring high operating comfort for the user.

Easy handling
The Tecnomix 130 is a compact mixer, easy to move around the job site and to load onto transport vehicles.

Blade assembly
The blade group consists of an external blade, an internal blade, and a planetary blade, all rotating clockwise.
For easy maintenance and cleaning, the blade system can be completely disassembled by simply pressing the release system and rotating counterclockwise.

Paint finish
All our machines and equipment are powder-coated with epoxy-polyester thermosetting paints, ensuring excellent gloss, resistance to atmospheric agents, and full environmental compliance.

Model	130	400
Drum capacity (L)	130	400
Effective output (L)	100	280
Drum diameter (mm)	700	1000
Blade rotation speed (rpm)	32	32
Machine weight (kg)	100	350
Wheel size / model (mm)	250	135 / R13
Motor power (hp)	2.5	5.5
Length (mm)	810	1550
Width (mm)	770	1300
Height (mm)	1210 (1030)	1550 (1230)